Home Community B-Hyve APP Forum With Smart Watering do I need to remove the manual schedule

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #1365

    Mac 44:67:55:01:e2.b0

    Seemed like it was double watering this am, I am only using station 1,2 and 3 at this time. Those three are set up for smart watering as well as manual.

    Should I remove the manual schedule?

    Also how do you check to update the timer firmware?

    Thanks Dave

    Spread the love!

    Hello Davewmorse, smart watering will water twice back to back. This is normal watering to prevent run-off. The soil can only take in so much water, and if you try to fill it up too much, the water will just start to pool. If you run multiple shorter durations, you’ll use less water but still have the green grass.

    If you are using smart, you should not be using a manual program as well.

    The timers do auto update their firmware, and your firmware was on the correct version. To check it, put the dial in the off position and hold down the Back and Program button.

    Spread the love!
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Spread the love!