Home Community B-Hyve Indoor/Outdoor Timer Water shows as scheduled, but does not turn on

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #3908
    Lekker01
    Participant

    I have setup a watering schedule to run on even days, but a lot of the times it does not turn on. I have to manually run the program for it to run. I’ve looked in the calendar and it shows that it was scheduled for that day, but when I review the watering history, it shows that there was nothing for that day and I also do not receive a notification that the watering is complete. How do I get this fixed so that it runs when it’s supposed to?

    MAC Address: 44:67:55:02:1B:FE

    Spread the love!
    #3934
    darkayen27
    Participant

    I am having the same issue; it keeps putting my schedule on Rain Delay because the weather station it is using is in KS, and I can’t figure out how to change it.

    Spread the love!
    #3938
    oduibhir
    Participant

    I’m having the same problem as DARKAYEN27. I hadn’t given b-hyve permission to use location services but I turned that on and it still won’t locate any weather station except a few in Kansas. It never says that it’s looking for any weather stations.

    Firmware version: 0031
    Hardware version: WT25.0001

    Spread the love!
    #3987
    Steven
    Participant

    lekker01, I have updated your firmware so see if that makes any difference. darkayen27 check, to make sure that your device is set to the correct location Settings->Devices->Click on your device, you should be able to change your weather station by clicking on the weather adjustments tab in device details. oduibhir, please post your MAC address so I can send a firmware update.

    Spread the love!
    #3992
    oduibhir
    Participant

    Hi Steven and thanks for your reply. My MAC address is: 44:67:55:00:FD:83

    Spread the love!
    #4125
    Lekker01
    Participant

    Looks like the firmware update fixed things, sprinklers have been working the last couple of days

    Spread the love!
    #4131
    Ryan
    Participant

    @oduibhir, I’ve updated your firmware.


    @Lekker01
    , that’s great! Just let us know if you have any further issues, and we’d be happy to help.

    Spread the love!
    #4138
    Boolah
    Participant

    Can you take a look at mine too? It was installed 2 weeks ago and all zones were manually tested. Since then, it’s never watered and currently doesn’t have anything scheduled. Thanks!

    MAC: 44:67:55:02:fb:c3

    Spread the love!
    #4142
    Ryan
    Participant

    @boolah, your firmware is up to date I’ve adjusted your watering restrictions from no watering in-between 5Am-2Am to no watering in-between 5Am-10PM. It has created a schedule, and should be set to go. If you would like to reset your restrictions, just be sure not to make it to short so a schedule can be processed.

    Spread the love!
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.
Spread the love!