Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #78061
    jackieb2fly
    Participant

    I installed this unit almost a week ago and only get the error message of “Pump Fault warning was triggered”. I have no pump or master valve. I wired the unit no issues. Upgraded from Rainbird-ESP (came with the house).The only way it will work (manually) is if it’s set to manual program & remove the common wire from its terminal, then reinsert the common wire into its terminal. It will run the full watering schedule manually. (Weird) I chatted with a representative but they were no help. Does anyone have any idea what’s going on here? Other unit worked fine. I just wanted to upgrade my box.

    MAC adress44:67:55:05:98:BC
    Firmware: 0039
    Hardware Version:WT25G2-0001

    Spread the love!
    #78074
    Stephen
    Keymaster

    @jackieb2fly The only thing that would trigger a Pump fault is something wired into the pump terminal. If you don’t have anything wired into the pump terminal, then I’d like to take a look at the timer. Please send us an email at [email protected] and we’ll take care of that for you.

    Spread the love!
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Spread the love!