Home Community B-Hyve Indoor/Outdoor Timer Manual operation of a zone not working correctly

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1459
    praella
    Participant

    I have a 12 station timer. It has been working ok. I have been using “Manual” mode frequently as I am still fine tuning my setup. Until this afternoon, manual mode too has been working fine for all the stations, but since then it doesn’t work as it is supposed to. Regardless of the run time set, it always runs only for one minute and then turn off. For example, if my run time for a station is set to 5 mins, it would run for one minute and then turn off. I tried several diagnostics like turning off/on the power supply, system reset etc, but nothing is working. What is going on?

    My MAC address is 44:67:55:02:88:8E

    Spread the love!
    #1578
    Stephen
    Keymaster

    @Praella, it looks like your timer doesn’t have a name and zip code. Without these two things, the timer will work buggy. I’d suggest going into settings, devices, your timer, and then update with at least a zip code and put a name on the timer.

    Spread the love!
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Spread the love!