Home Community B-Hyve Indoor/Outdoor Timer Installation with a index Valve

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #779


    I have a index valve with 3 zones and a old Intermatic sprinkler.
    I have only 2 gray wires connect to my intermatic
    one gray to clock and the other to number 1
    and 3 others wires black to comon – green to ground – and white to clock also

    On my Orbit b hyve
    I made this installation the gray wire (to clock) on comon and the other gray to zone 1, i try to switch the 2 wires, but there is no change, it doesn’t work : no watering, on the screen i see zone 1 start but there is no water.
    I don’t know if i can plug the black wire on comon, the grey to zone 1 and the other gray to pump ?

    I see on other post that i need to buy jumper wire to have delay between each zone, i don’t know if it’s necessary because i have only 3 zones, maybe i can program 6 zones to have delay?

    I live in Florida a lot of house have this kind of installation.

    Thank you for your help.

    Sorry for my english…

    Spread the love!

    Thanks for posting Vanessa! It depends on what the black, green, and white wires are connecting to. Could you email pictures of your installation set up to [email protected] so we can further assist you in your installation?

    Spread the love!
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Spread the love!