Home Community B-Hyve APP Forum Inconsistent rain delay

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1836
    porkozone
    Participant

    I am getting a rain delay on one timer, but not another that appear to be set up the same.

    I have two hose valves set up under my account. I have a manual program set for each. I have smart watering on in the device detail, but off on the zone setting.

    Before today, I had not received any alerts or auto-rain delays. Today, ONE valve automatically set a rain delay, but the other did not. Why would that be the case?

    The only difference between the two I see is that I have watering restrictions turned “off” on the one without the auto-delay, and “on” on the one that got the auto-delay (but even though it is on, I have it set to every day watering and no other restrictions…so nothing that should affect it. I basically turned on the toggle, but did not set any actual restrictions).

    Looking at the beta web app, I see that the temperatures for each of the devices is off by a degree here and there for the week – again why would it be any different if pulling from the same source? the expected rain amount appear consistent, however. Still it seems very inconsistent with its data.

    Hub (4467552020bc)
    Side Path (South) (446755104637) – has rain delay
    Front Yard (North) (44675510acac) – no rain delay

    Spread the love!
    #3219
    porkozone
    Participant

    I am still having this issue. I have since added a third hose valve, and that one also will get the auto rain delays, but the one valve still does not. As far as I can tell, I have the settings the same on all three of these, but one does not autos the rain delay.

    Spread the love!
    #3238
    Ryan
    Participant

    I’ve updated the firmware for your hub and removed the rain delays off your timer.

    Spread the love!
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Spread the love!