Home Community B-Hyve Indoor/Outdoor Timer Dropped internet, app reports watering complete, no watering happened.

  • This topic has 1 reply, 2 voices, and was last updated 3 years ago by Ryan.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #4282

    So my new grass is dying, and the old grass isn’t looking so healthy.

    The app reports that watering has occurred, but looking at the grass after this report shows no watering has happened.

    Stations: 6 (10 set up)
    MAC Address: 44:67:55:00:ee:90
    Firmware Version: 0031
    Hardware Version: wt25-0001
    Wi-Fi Version: 1.4.0

    I’m not sure I understand why it says 6 stations, with 10 set up.

    I currently have 3 active programs, along with smart watering. I’d almost like to kill smart watering and have a program D for watering the lawn, however I can’t add a program D, just A – C.

    If I look at the App, I can’t turn on programs A and B, they just turn back off. Looking at the timer itself all 3 are on.



    Spread the love!

    Hello Jnjholding, I’ve updated the firmware on your timer, so your going to want to do a factory reset on your timer. At the timer set it to off, and then hold down the reset button until everything shows on your screen. after that go ahead, and unplug your ribbon cable for 5 seconds. Once you’ve plugged it back in update your Wi-Fi settings. You should be able you programs again. You may want to try deleting your programs before you try the above steps, and then add them back after you update your Wi-Fi settings. If you need any further assistance please just let me know, and i’d be happy to help!

    Spread the love!
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Spread the love!