Home Community B-Hyve Indoor/Outdoor Timer Does smart watering actually work?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #1285
    johnclark79
    Participant

    I’ve had the B-Hyve residential setup for a few months and smart watering never actually starts the sprinklers, instead I get the message that watering has completed – I check the watering history and every zone is reporting <1 minute

    I’ve reset the connection and reset the B-hyve timer with no apparent success. Help please

    Spread the love!
    #1286
    johnclark79
    Participant

    FYI
    MAC Address: 44:67:55:02:43:21
    Firmware Version: 0031

    Spread the love!
    #1337
    Stephen
    Keymaster

    Hello JohnClark79, do you have a rain sensor attached to this timer? Try turning off the rain sensor terminal. To do this, hold down the rain delay button at the timer for about 3-5 seconds, you should see a message pop up that says “SENS OFF”. Then try watching the timer and see if it operates properly.

    Spread the love!
    #1338
    johnclark79
    Participant

    I did have a rain sensor attached, but removed it. I have made this setting change. Next scheduled watering is May 10; will report back if this works or not.

    Spread the love!
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
Spread the love!