Home Community B-Hyve Indoor/Outdoor Timer Confirming terminal strip wiring and question about 24V AC terminals

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #4698
    mooch91
    Participant

    The labels on my terminal strip do not line up with the terminals, so I wanted to confirm the wiring of the first few locations:

    1: 24V AC out
    2: 24V AC out
    3: sensor
    4: sensor
    5: common
    6: pump
    7+: valves

    Under what circumstances would I use the “24V AC out”? I have a system with a master valve which I have tied to the “pump” terminal. I accidentally had it on one of the “24V AC out” locations first and it did not work.

    Thanks!

    Spread the love!
    #4699
    rocourteau
    Participant

    Exact. The last terminal (after the zone valves) is a second COM connection.

    Not sure what the 24VAC out could be used for. Not using it.

    There should be a jumper wire between the two sensor terminals.

    Spread the love!
    #4783
    Ryan
    Participant

    Hello mooch91, you use the 24VAC out terminals for a rain sensor along with the sensor terminals.

    Spread the love!
    #4809
    mooch91
    Participant

    Thanks, I saw that the Orbit wireless rain sensor connects in to the 24V AC.

    Do you have a list of other compatible rain sensors, wired and wireless, that work with the B-hyve controllers?

    Spread the love!
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
Spread the love!