Home Community B-hyve Smart Hose Faucet Timer Can't connect to wifi

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #3264
    FortWayner
    Participant

    Like many on this forum, my new BHyve won’t connect. ‘Device not found…” message. Please help, seems like you may have to manually do a firmware update? Thanks!

    Spread the love!
    #3344
    Ryan
    Participant

    If you’ve connected it to your phone through the app then we can send an update to your hub, but we would need a mac address. After your hub has been updated your timer should pair.

    Spread the love!
    #3460
    elx88
    Participant

    I have the same problem. I’m able to find and connect to orbit_smarthome_XXXXX but i can not find my device when setting up

    Spread the love!
    #3464
    elx88
    Participant

    Forgot to mention my MAC address is 44:67:55:02:5E:01

    Spread the love!
    #3586
    Ryan
    Participant

    elx88, Is this for a 6 station timer? I’ve gone ahead an updated your firmware for you. Also you Don’t have an address entered so your timer may experience issues because of that. added to that you have smart watering enabled, but again no address entered so it will not water properly either due to that.

    Spread the love!
    #77189
    chrisyates
    Participant

    I’m having the same issue and cannot pair my phone or get the controller to send an Orbit_smarthome_XXXXX wifi signal to connect to. Can someone help?

    Spread the love!
    #77233
    Stephen
    Keymaster

    @Chrisyates this timer is a Bluetooth Hose Faucet timer. It does not have Wi-Fi capabilities built into this at all. You can view our guides on pairing this unit here: https://bhyve.orbitonline.com/help-center/?stPage=guideListPage-1

    There are a few different ways this timer can be paired, so you’ll want to determine which way you’re trying to pair.

    Spread the love!
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.
Spread the love!