Home Community B-hyve Smart Hose Faucet Timer 32 day manual rain delay won't clear

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #5640
    ebkruse01
    Participant

    Logged into the app and found both my timers have a 32day manual rain delay.
    I tapped on the X to clear the rain delay but it will not clear.
    Have tried everything but it will not clear.
    I am able to manually water but the timers will not run in auto.

    Spread the love!
    #5677
    Ryan
    Participant

    Hello ebkruse01, go ahead and try connecting to your timers via Bluetooth you should then be able to delete the rain delay. Also could I have the mac address of one of your devices? That way I can take a look at your system, and push any available updates. Thank you!

    Spread the love!
    #5680
    ebkruse01
    Participant

    Hose timers are
    44:67:55:11:0E:42
    44:67:55:10:DF:AC

    Wifi module is
    44:67:55:20:7C:65

    Thanks.

    Spread the love!
    #5683
    Ryan
    Participant

    Ok, your hub’s firmware has been updated. Please connect to your timer via Bluetooth to disable your rain delay. If a message stating that your timers settings are off please power cycle your timer and reestablish your bluethooth connection to save your settings/programs. Once you’ve done that you can connect your timer back to the Wi-Fi bridge/hub.

    Spread the love!
    #5693
    ebkruse01
    Participant

    I can not seen to get either timer to connect via bluetooth. Is there a way to default them?

    Spread the love!
    #5694
    ebkruse01
    Participant

    Ok. Power cycled phone. Now bluetooth is working.

    Spread the love!
    #5695
    ebkruse01
    Participant

    Everything is clear now and appears to be working. Thanks.

    Spread the love!
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.
Spread the love!